17 Reasons Why You Should Avoid Sliding Patio Doors Repair

· 6 min read
17 Reasons Why You Should Avoid Sliding Patio Doors Repair

Sliding Patio Doors Repair

Sliding patio doors are a great way to enjoy your outdoor space, however they can become difficult to open and close. This can be due to a variety of problems, such as dirty tracks or a misaligned slider.

Clean the track and Lubricating the rollers. You can also re-align the rollers by using the adjustment holes located on the bottom side of the movable door panel.

Tracks that are damaged or dirty

A sliding door that doesn't slide as it should can be due to an unclean or damaged track. Over time, dirt, grit and even corrosion can form blocking the track from moving smoothly. The solution is to clean the track thoroughly with a brush and mild detergent. This job should be done regularly to ensure smooth operation and to prevent expensive repairs in the future.

A door that is leaking can be a frequent issue. It requires immediate attention in order to avoid structural damage, water damage and mold growth. The problem is usually caused by worn weather stripping and misaligned door. This can be rectified by replacing the weather stripping and aligning the doors.

Another issue that can be fixed with a little DIY work is when rollers jump off the track. Find a friend to assist you with this task as the door could be heavy. Sit inside the house and lean a panel toward you to move the rollers. To prevent the panel from falling, put it on sawhorses after it has been lifted off the bottom track. Then loosen the screws that hold each roller in place and pry them out with a screwdriver. You can now clean any dirt that is caught between the wheels and the tracks. Clean each wheel using denatured alcohol on a cloth. Reposition the wheels on their tracks and attach them once more.

It may be possible to straighten bent track sections with a rubber mallet, and a piece of wood. However when the bent section is close to the hinges and has the potential to cause more damage, you'll be better off calling a professional to ensure safety.

Rollers that are not aligned

If your sliding door is experiencing problems with sliding, it's most likely that the roller wheels have been misaligned. The wheels may be dirty or rusted and their bearings are worn down. This friction causes the door to snag and grind when opened or closed. This can also trigger the sound of squeaking.

Fortunately, this is an easy fix. The wheels are attached to the bracket, which can be adjusted, so you don't have to remove the door. Use a screwdriver and find the adjustment holes on the frame (usually either side). Rotate the screws to turn the wheels. Rotating the screw clockwise will raise the wheel while turning it counterclockwise lowers it. Continue adjusting the door until it opens and closes smoothly.

It is important to adjust the wheels prior adjusting the latch. To ensure that the lock functions correctly the latch hooks need to be aligned with the strike plate. If you don't do this, the latch may open or close while you're away from the room.

Sliding patio doors are a major investment, and making sure they are operating properly can keep your family safe and secure. By addressing common problems like damaged tracks, rollers or handles, you can prevent expensive repairs in the future. Contact our team for more information about patio doors. We can assess your needs for repair of your sliding patio door and assist you in keeping it in top condition. Our professionals can also assist with any replacement parts that you might require.

The door frame is loose or damaged

Sliding patio doors are a wonderful addition to any home. They offer a stylish and practical alternative to hinged or swing-open doors for patios. But, just like any other hardware, they may experience various issues in time. Many of these problems can be fixed with a bit of DIY knowledge.

A gap in the frame is a typical problem with sliding patio doors. This can be due to a number of factors, such as a rollers or tracks that are not aligned properly or a damaged track door, or a bowed door frame. Most of the time the reason for this problem can be easily fixed by removal of the door and reconnecting the track or rolling elements. It is essential to be very careful not to damage either the frame or track.

In certain instances, it may be necessary to replace the entire track, which can be done easily with a universal replacement kit that is available at all major hardware stores. These kits are simple to install and will have your door working perfectly in no time.

It is important to check your sliding door's frame and hardware for signs of wear and tear, for instance loose bolts or screws. They can usually be tightened with a screwdriver or wrench, making this an easy and effective DIY patio door maintenance procedure. It is also important to oil your rollers and tracks to make sure they operate smoothly and prevent premature wear.

Patio doors are often the primary entry point to the backyard and outdoor living space for a majority of homeowners. Therefore, they have to to function properly in order to ensure the safety of their home and provide security. By making the effort to implement these simple DIY maintenance steps, homeowners can prolong the life span of their sliding patio doors and reduce costly repairs or replacements.



Handle is not working properly

Patio doors that slide open are an excellent way to enter your home and get access to your backyard, however they can become difficult to operate if they become misaligned. A defective handle could cause the door to become stuck or difficult to open and close. The good part is that repairing the handle that is loose is a fairly simple job that can be completed at home.

In many cases, a handle that is loose is simply the result of screws that have made their way out of the backplate. To resolve this issue you can simply tighten the two screws that are on the inside of the handle with a screwdriver. If you notice that the handle is loose, it could be a sign that the threads are worn and need to be replaced.

A broken latch could also be the cause. It is more likely that the latch will break if made of metal instead of plastic. Try applying lubrication to the latch to see if it's not engaging or turning. If not, you could require replacing the lock completely.

If the handle is damaged or broken, it could be difficult to operate. If this happens, you will have to replace the handle with one that is in line with the style and style of your patio doors.

Whether your patio doors are old and dated or new and brand new, Feldco can help you get them back on track. We have doors of high-quality in a variety of sizes and styles that can be installed to perfectly fit your home. Contact us today to find out more about our products!  patio doors repairs  offer services to Southern California homeowners, including Ventura County and Orange County.

Afflicted Weatherstripping

It's time to replace your weather stripping if see light around closed doors and windows, or sense a draft pulsing towards the door or window. The strips form a tight seal that keeps unwanted air, pests, and water from entering your home. This helps keep the conditioned and heated air in, thereby saving money on energy bills.

It could have lost its positive seal, bouncy, due to age. This can be identified by using a dollar bill and running it under the seal along the top of the door frame as well as the below the jamb of the door where the two overlap. If the dollar bill slides between the seal and door easily, it is time to replace the weatherstripping.

It's tempting to cut off only the worn portion of weather stripping and replace it, but this could result in cracks on the sides of the new piece and could cause issues with the seal in the future. It's much more effective to replace the entire stripping so that you are able to rest that your door is sealed again.

To make a DIY project that is simple take a look at our guide on weather stripping to remove old weather stripping and then apply the right material to your sliding patio door and door frame to ensure a long-lasting solid, secure seal. This is a great way to save energy costs and repair your sliding patio door. Don't wait until its too late. Your wallet as well as your home will be grateful.